2022-2024 Civic SI Intake

Designed, tested and 3D printed right here in the USA. The "Cool Noises" intake by Kei Fab is made for the 22-24 Civic SI. Made from industrial strength thermoplastics, this intake reduces weight and increases the thermal barrier between your hot engine and intake temperatures. No tune is required and you will smile once you hear your turbo sing. Turbo noise and the blow off valve are clearly heard once the intake is installed.  The intake retains your factory lower air box section to keep the already good design of the cold air intake duct. You will remove the upper intake housing and air filter to install this new system.

You receive: 
High temperature intake tube
Multi-ply silicone coupler
2x Stainless Steel clamps
High flow cone air filter

You need: A Phillips screw driver to remove your mass air flow sensor to transfer to the new intake. You will re-use your factory screws. A flat head screw driver (or socket) to tighten the clamps on the couple and intake filter. That's it!